2020 – Our Current Building Codes

Skip to main content
Print

2020 – Our Current Building Codes

Manitoba Construction Codes

Manitoba’s construction codes are adopted with Manitoba specific amendments by regulation and are available on the Manitoba Laws website:

The Manitoba Building Code regulation:
M.R. 78/2023, Manitoba Building Code (gov.mb.ca)

The Manitoba Plumbing Code regulation:
M.R. 80/2023, Manitoba Plumbing Code (gov.mb.ca)

The Manitoba Energy Code for Buildings regulation:
M.R. 79/2023, Manitoba Energy Code for Buildings (gov.mb.ca)

The Manitoba Fire Code regulation
M.R. 82/2023, Manitoba Fire Code (gov.mb.ca)


These codes are the first to have energy efficiency Tiers.

The 2020 editions of the codes allow provincial and territorial regulators to select energy efficiency tiers for housing and small buildings under the National Building Code, with five tiers to choose from, and large or complex buildings under the National Energy Code for Buildings, with four tiers to choose from. The highest tiers for either code means a building realizes at least a 60 per cent reduction in energy consumption over the baseline Tier 1 and is a step towards Canada developing net-zero emissions codes by 2050, when new buildings will be powered entirely from non-emitting sources.

Manitoba is initially adopting the baseline Tier 1, for the building and energy codes and is working with the federal government to develop a roadmap and to build capacity in Manitoba for higher tier adoption in the future. Tier 1 represents approximately a 20 per cent energy efficiency improvement over the previous Manitoba requirements for large and complex buildings. While Tier 1 for housing and small buildings under the 2020 National Building Code remains comparable to the previously adopted 2010 edition, Manitoba will continue to have additional requirements for heat-recovery ventilation in residential applications on top of the national requirements, while working towards adopting higher tiers.

TRAINING

Here are some resources on the new codes to help you familiarize yourself with them.

On January 1st 2024 the 2020 editions of the national model building, plumbing, energy and fire codes published by the National Research Council (NRC) will come into effect and be enforced.  For energy efficiency, it is Tier 1 across the board for both commercial and residential.

Permitting and inspections authorities responsible for adopting and enforcing the Manitoba Building Code, Manitoba Plumbing Code and Manitoba Energy Code for Buildings will be required to approve building and plumbing permits based on the 2020 national model codes starting January 1, 2024.

Inspections based on permits approved before January 1, 2024 must ensure compliance with approved plans based on the previous codes.

Table of Contents